Driveway replacement (concrete) cost in Atlanta, GA
High buyer appeal
In Atlanta, GA, a midrange driveway replacement (concrete) typically costs around $6,900 — about 2% below the national benchmark of $7,000, reflecting local labour and material prices. On average it recoups about 65% of its cost at resale.
Budgeting for a driveway replacement (concrete) in Atlanta, GA means planning for United States pricing. At a smart-refresh (budget) finish you would expect around $4,100, rising to about $13,000 for a luxury finish. Because a driveway replacement (concrete) recoups roughly 65% at resale, the net cost after resale in Atlanta, GA works out to about $2,400 — the part you don't get back when you sell.
Atlanta is near the national average, with a deep pool of contractors keeping pricing competitive for most projects.
Local cost factors in Atlanta, GA
- Deep contractor pool
- A large metro with plentiful trades keeps most project pricing close to the national average.
- Humid subtropical climate
- Heat and humidity shape HVAC sizing, moisture control and material choices, particularly for exteriors and basements.
- Sprawl & travel time
- The metro's size means contractor travel and scheduling can vary noticeably between in-town and outer-suburb projects.
| Estimated cost in Atlanta, GA | $6,900 |
| Typical range | $5,800 – $7,900 |
| Resale value added | $4,500 |
| Cost recouped (ROI) | 65% |
| US national average (for comparison) | $7,000 |
Driveway replacement (concrete) cost by finish level in Atlanta, GA
| Finish level | Estimated cost | Resale value added | Recouped |
|---|---|---|---|
| Smart refresh (budget) | $4,100 | $2,900 | 71% |
| Balanced upgrade (midrange) | $6,900 | $4,500 | 65% |
| Luxury finish (upscale) | $13,000 | $6,800 | 52% |
How Atlanta, GA compares
A midrange driveway replacement (concrete) across United States markets, for comparison — same project, local pricing:
| City | Midrange cost | Recouped |
|---|---|---|
| Atlanta, GA | $6,900 | 65% |
| New York, NY | $9,100 | 65% |
| Los Angeles, CA | $8,500 | 65% |
| Chicago, IL | $7,700 | 65% |
| Houston, TX | $6,900 | 65% |
What's included
- Removal and disposal of the old surface
- Sub-base grading and preparation
- New concrete (or asphalt) pour
- Edging, jointing and finishing
- Curing and sealing
Pro tip: If the existing driveway is only stained or lightly cracked, resurfacing or sealing is far more cost-effective than a full replacement — fix before you rip out.
What affects the cost of a driveway replacement (concrete)
- Area
- Priced per square foot — the size of the driveway is the primary cost driver.
- Material & finish
- Asphalt is cheapest, plain concrete mid-range, and stamped concrete or pavers the most expensive.
- Tear-out & base
- Removing the old surface, disposal, and grading/preparing the sub-base add cost beyond the new surface itself.
- Drainage & slope
- Correcting drainage, adding a slope, or building up a failed base increases the total.
Estimate your driveway replacement (concrete) in Atlanta, GA
What are you renovating?
Pick a category, or search for your project directly.
Which market?
Adjusts benchmark costs to your currency and regional cost level.
How far do you want to take the finish?
There's no wrong answer — we'll show what each level costs and returns.
Want to fine-tune it?
All optional — we'll use typical values if you skip this.
Pick a project on the left, and your numbers will appear here.
Driveway replacement (concrete) in Atlanta, GA: common questions
How much does a driveway replacement (concrete) cost in Atlanta, GA?
A midrange driveway replacement (concrete) in Atlanta, GA costs about $6,900, typically $5,800–$7,900. A budget (smart-refresh) finish runs around $4,100, and an upscale (luxury) finish around $13,000.
Is a driveway replacement (concrete) more expensive in Atlanta, GA than average?
No — in Atlanta, GA it runs about 2% below the national benchmark of $7,000, helped by deep contractor pool.
What ROI does a driveway replacement (concrete) have in Atlanta, GA?
About 65% of the cost is typically recouped at resale — roughly $4,500 in added value, for a net cost of about $2,400 after resale.
How much does it cost to replace a driveway in 2026?
About $7,000 on average, from roughly $4,000 for a small asphalt driveway to $15,000+ for a large concrete or decorative one.
Does a new driveway add value?
It recoups around 65% of its cost, and because a cracked driveway is one of the first things buyers notice, replacing it removes an easy negotiating lever.
Other locations
How to read these United States figures. The cost is the US national midrange benchmark adjusted by a Atlanta, GA cost multiplier (0.98×) and shown in USD. The “% recouped at resale” is a national (US-derived) Cost-vs-Value benchmark applied to the local cost — it is not a locally measured resale figure, and real recovery varies by United States market conditions. These are planning estimates only; confirm with local contractor quotes and a local agent. Not financial or real-estate advice. Reviewed June 2026. See our full methodology →
Plan the whole project
Renovation Planner Pro tracks budget, quotes, payments and ROI in one workbook.
See Planner Pro →