Entry door replacement (steel) cost in Brisbane, AU
Investor favourite
In Brisbane, AU, a midrange entry door replacement (steel) typically costs around A$3,800 — about 5% above the national benchmark of $2,400, reflecting local labour and material prices. On average it recoups about 150% of its cost at resale.
Budgeting for an entry door replacement (steel) in Brisbane, AU means planning for Australia pricing. At a smart-refresh (budget) finish you would expect around A$2,300, rising to about A$7,300 for a luxury finish. Because an entry door replacement (steel) recoups roughly 150% at resale, the net cost after resale in Brisbane, AU works out to about A$-1,900 — the part you don't get back when you sell.
Brisbane has climbed above Melbourne on renovation cost, with post-flood rebuilding, interstate migration, and 2032 Olympics infrastructure all competing for the same pool of licensed trades.
Local cost factors in Brisbane, AU
- Competing demand for trades
- Flood rebuilding, interstate migration and Olympics infrastructure all pull on the same pool of licensed trades.
- Queenslander housing
- Timber, elevated 'Queenslander' homes create distinctive stumping, subfloor and weather-exposure cost items.
- Flood & subtropical climate
- Flood-zone rules and heavy summer rain shape materials, drainage and site work, especially on lower-lying blocks.
| Estimated cost in Brisbane, AU | A$3,800 |
| Typical range | A$3,300 – A$4,400 |
| Resale value added | A$5,700 |
| Cost recouped (ROI) | 150% |
| US national average (for comparison) | $2,400 |
Entry door replacement (steel) cost by finish level in Brisbane, AU
| Finish level | Estimated cost | Resale value added | Recouped |
|---|---|---|---|
| Smart refresh (budget) | A$2,300 | A$3,600 | 156% |
| Balanced upgrade (midrange) | A$3,800 | A$5,700 | 150% |
| Luxury finish (upscale) | A$7,300 | A$10,000 | 137% |
How Brisbane, AU compares
A midrange entry door replacement (steel) across Australia markets, for comparison — same project, local pricing:
| City | Midrange cost | Recouped |
|---|---|---|
| Brisbane, AU | A$3,800 | 150% |
| Sydney, AU | A$4,000 | 150% |
| Melbourne, AU | A$3,700 | 150% |
| Perth, AU | A$3,900 | 150% |
| Adelaide, AU | A$3,300 | 150% |
What's included
- New steel or insulated entry door
- Weatherstripping and hardware
- Fitting and sealing
- Paint or finish
Pro tip: Pair with fresh paint and tidy landscaping for a curb-appeal upgrade that costs little and shows a lot.
What affects the cost of a entry door replacement (steel)
- Door material
- Steel is cheapest and highest-ROI; fibreglass is mid-priced and durable; solid wood is the most expensive.
- Glass & sidelights
- Adding glazing or sidelights widens the opening and adds trim and labour — a noticeable step up in cost.
- Frame condition
- If the existing frame is rotted or out of square, replacing the whole unit (not just the slab) costs more but is often necessary.
- Hardware & finish
- A quality handleset, smart lock and clean paint finish are cheap touches that lift the perceived value further.
Estimate your entry door replacement (steel) in Brisbane, AU
What are you renovating?
Pick a category, or search for your project directly.
Which market?
Adjusts benchmark costs to your currency and regional cost level.
How far do you want to take the finish?
There's no wrong answer — we'll show what each level costs and returns.
Want to fine-tune it?
All optional — we'll use typical values if you skip this.
Pick a project on the left, and your numbers will appear here.
Entry door replacement (steel) in Brisbane, AU: common questions
How much does an entry door replacement (steel) cost in Brisbane, AU?
A midrange entry door replacement (steel) in Brisbane, AU costs about A$3,800, typically A$3,300–A$4,400. A budget (smart-refresh) finish runs around A$2,300, and an upscale (luxury) finish around A$7,300.
Is an entry door replacement (steel) more expensive in Brisbane, AU than average?
Yes — in Brisbane, AU it runs about 5% above the national benchmark of $2,400, mainly because of competing demand for trades.
What ROI does an entry door replacement (steel) have in Brisbane, AU?
About 150% of the cost is typically recouped at resale — roughly A$5,700 in added value, for a net cost of about A$-1,900 after resale.
How much does it cost to replace a front door in 2026?
About $2,400 for a steel door nationally, from roughly $1,500 for a standard unit to $5,000+ for a premium door with sidelights.
Does a new front door add value?
Yes — a steel entry door is one of the highest-ROI projects, typically recouping around 150% of its cost thanks to the outsized curb-appeal boost.
Other locations
How to read these Australia figures. The cost is the US national midrange benchmark adjusted by a Brisbane, AU cost multiplier (1.05×) and shown in AUD. The “% recouped at resale” is a national (US-derived) Cost-vs-Value benchmark applied to the local cost — it is not a locally measured resale figure, and real recovery varies by Australia market conditions. These are planning estimates only; confirm with local contractor quotes and a local agent. Not financial or real-estate advice. Reviewed June 2026. See our full methodology →
Plan the whole project
Renovation Planner Pro tracks budget, quotes, payments and ROI in one workbook.
See Planner Pro →