EV charger installation (Level 2) cost in Perth, AU
Investor favourite
In Perth, AU, a midrange ev charger installation (level 2) typically costs around A$2,900 — about 7% above the national benchmark of $1,800, reflecting local labour and material prices. On average it recoups about 100% of its cost at resale.
Budgeting for an ev charger installation (level 2) in Perth, AU means planning for Australia pricing. At a smart-refresh (budget) finish you would expect around A$1,800, rising to about A$5,600 for a luxury finish. Because an ev charger installation (level 2) recoups roughly 100% at resale, the net cost after resale in Perth, AU works out to about A$0 — the part you don't get back when you sell.
Perth has become Australia's second-most expensive city to build in after Sydney, with the mining sector competing for trades and Western Australia's isolation adding freight cost to nearly every material.
Local cost factors in Perth, AU
- Mining-sector labour pull
- The resources sector competes hard for skilled trades, tightening availability and lifting rates.
- Isolation & freight
- Western Australia's distance from eastern supply hubs adds freight cost to nearly every material.
- Hot, dry climate
- Intense summer heat drives demand for efficient cooling, insulation and heat-tolerant exterior materials.
| Estimated cost in Perth, AU | A$2,900 |
| Typical range | A$2,500 – A$3,400 |
| Resale value added | A$2,900 |
| Cost recouped (ROI) | 100% |
| US national average (for comparison) | $1,800 |
EV charger installation (Level 2) cost by finish level in Perth, AU
| Finish level | Estimated cost | Resale value added | Recouped |
|---|---|---|---|
| Smart refresh (budget) | A$1,800 | A$1,900 | 106% |
| Balanced upgrade (midrange) | A$2,900 | A$2,900 | 100% |
| Luxury finish (upscale) | A$5,600 | A$4,800 | 87% |
How Perth, AU compares
A midrange ev charger installation (level 2) across Australia markets, for comparison — same project, local pricing:
| City | Midrange cost | Recouped |
|---|---|---|
| Perth, AU | A$2,900 | 100% |
| Sydney, AU | A$3,000 | 100% |
| Melbourne, AU | A$2,800 | 100% |
| Brisbane, AU | A$2,900 | 100% |
| Adelaide, AU | A$2,500 | 100% |
What's included
- 240V circuit and dedicated breaker
- Level 2 charger / wall connector
- Conduit and wiring run
- Permit and electrical inspection
- Panel-capacity check (upgrade if needed)
Pro tip: Mount the hardwired unit and keep the install tidy and inspected — a clean, permitted Level 2 point reads as a feature; a dangling portable cord does not. Factor the 30% federal tax credit into your real net cost.
What affects the cost of a ev charger installation (level 2)
- Panel capacity
- If the panel is full, a service or panel upgrade ($1,500–$4,000+) is the biggest cost — the charger itself is minor by comparison.
- Wiring distance
- The run from panel to charger location drives conduit and labour; a garage beside the panel is cheapest.
- Charger unit
- A basic hardwired wall connector versus a smart, Wi-Fi-enabled unit is a modest but real price difference.
- Permit & inspection
- A permitted, inspected install is what makes it a safe, sellable feature — and is required in most jurisdictions.
Estimate your ev charger installation (level 2) in Perth, AU
What are you renovating?
Pick a category, or search for your project directly.
Which market?
Adjusts benchmark costs to your currency and regional cost level.
How far do you want to take the finish?
There's no wrong answer — we'll show what each level costs and returns.
Want to fine-tune it?
All optional — we'll use typical values if you skip this.
Pick a project on the left, and your numbers will appear here.
EV charger installation (Level 2) in Perth, AU: common questions
How much does an ev charger installation (level 2) cost in Perth, AU?
A midrange ev charger installation (level 2) in Perth, AU costs about A$2,900, typically A$2,500–A$3,400. A budget (smart-refresh) finish runs around A$1,800, and an upscale (luxury) finish around A$5,600.
Is an ev charger installation (level 2) more expensive in Perth, AU than average?
Yes — in Perth, AU it runs about 7% above the national benchmark of $1,800, mainly because of mining-sector labour pull.
What ROI does an ev charger installation (level 2) have in Perth, AU?
About 100% of the cost is typically recouped at resale — roughly A$2,900 in added value, for a net cost of about A$0 after resale.
How much does it cost to install an EV charger in 2026?
About $1,800 on average, from roughly $800 for a simple install to $4,000+ when a panel upgrade or long wiring run is required.
Does an EV charger add home value?
It roughly recoups its cost and differentiates a listing in EV-heavy markets (CA, WA, CO, parts of NY); in low-EV areas the effect is smaller.
Other locations
How to read these Australia figures. The cost is the US national midrange benchmark adjusted by a Perth, AU cost multiplier (1.07×) and shown in AUD. The “% recouped at resale” is a national (US-derived) Cost-vs-Value benchmark applied to the local cost — it is not a locally measured resale figure, and real recovery varies by Australia market conditions. These are planning estimates only; confirm with local contractor quotes and a local agent. Not financial or real-estate advice. Reviewed June 2026. See our full methodology →
Plan the whole project
Renovation Planner Pro tracks budget, quotes, payments and ROI in one workbook.
See Planner Pro →